RC-Hangout

It will be nice to see that fly DOG. Once you get it together good luck.

Well Tony. Superbad and all the rest that that gave me input. Changing the std rx and going with the d4r-II using cppm worked I flew 6 batts with no brownout. I guess eliminating wire fixed the problem anyway it flying great now again thanks guys..

Yes I did do the mods. I.m gonna try the d8r xp I have and connect with cppm you know the 1 wire from rx. I'm thinking it thr rxs I have so will try different type ..A little big for the 450 but if it works will get a couple of the d4rII and run them.

Hey Tony thanks for the effort.

Ok frsky V8R7-II hv rx yellow kbar rxa goes to ch1 ail ch2 ele ch4 rud, rxb goes to esc and the signal wire from esc goes to ch3 for thr but the sig from rxb goes to ch5 gain, rxc puts power to rx and the sig goes to ch6 for pitch. ch7 and 8 not used. Having a hard time explaining this hope you unde...

Tony I really appreciate all this effort you guys are putting out for me. See this is why RC Hangout is the best!!!! Yes I did insulate them b4 I ever put power to them ..

Maybe a set of kst215 is what I need .The turnigy 306g is what I am running now . I was thinking they were the same as the kst. idk.

Well I just keep working at it with all the help I'm getting from everyone we'll get it worked out .

Well I spent all morning reading all the info I could fine about the brownout issue I keep having. Seems to me a cap sould fix the problem. Just for all of you to know that's trying to help me with this. Using standard rec connection no sat or anything like that. So I made a y cable so I can connect...

Dog you have to go with technology always changing. lol But still if it not broke don't fix it . I know that everytime we go flying your ar7200 always work perfect. I can't ever remember a time you ever had trouble with them.

I will try 4700 also and see what happens. Thanks again..

Thanks for the info.My question is do you just plug the 6800 uf cap into an open channel on the rec. If so I have one plugged in already but it only 3300uf that may be my problem. Even putting the cc bec on didn't stop it from cutting out. Funny thing if you are high enough when I cuts out power wil...

Even after rerouting the wires. Still losing power. I just finished going trough all the wiring I don't like the connection between the esc and batt plug. I will replace the plug and try that. Then if that don't fix it. I will add the cc 10a bec. (just don't want bec on the 450 but if I must so be it)

Well like I said I just got mine so maybe once it is time for you to get one. I should be able should be able to give pros and cons.

I recently got the Taranis+ and I like it. b4 I had a turnigy 9x with er9x it was good. The taranis is much more like a high end radio. If you have never used the open tx firmware it has steep learning curve. Once you get a handle on its functions its great. I don't do fpv but I'm sure it would work...

Well I made the changes the cc bec has not arrived so I did the rewire using the internal bec. I now have the esc going straight into the kbar. Checked everything out it all worked like it should. The real test will be Sat morning. Again guys thanks for all the help.

Tony wrote:Welcome to hangout Smoke... Have you got any pictures to show us your kit

Working on the pics

Thanks Superbad

Ok I think you have found it because I dont have esc going in kbar first. I will try it out this weekend. Then let you know how it goes thanks alot Superbad and everyone else that helped out.

I didnt think I could do that I thought the esc signal wire has to go to the throttle channel on the rx first then power to the kbar. Right now I am using the internal bec. Im not sure how to do it the way your talking about.