RC-Hangout

Quite a while ago now, guess the high prices finally got them...

awesome mate.

should not cause an issue mate, both frequency hop on 2.4ghz so should be ok.

as for the 5.8ghz side make sure you have good channel separation and test it over distance on the ground before you test it in the air to see how bad your interference may be.

check to see if your sat is flashing after it happens,

did not hear re initialising tones so not a fc reboot, could be a load issue on the regulator

it should be a jst sh 1.25 pitch 4 pin

Should be this one mate

http://www.rocketcityfpv.com/Camera-Cab ... _p_85.html

LOL dog that was my last battery of the evening so having the mid air was no issue, good fun chasing and being chased by him actually.

Thoughts with you mate.

Thanks Guys, yeah good collision, I went down cos mine was a 1/3rd the weight of his, but I also hit him underneath which resulted in a broken prop for me.....

yeah is surprising how many times that happens in our club, mid airs that is.

Got to have a good outing last evening, first time I've been on a course in 2018 and flying a 3" quad while everybody else was flying a 5" rig was fun, kept up decently. great night was had and much folly and banter exchanged, but here's a quick video of the last run I did, video is courte...

Household wire is usually copper core, not sure what core is in the silicone though but its a lot more flexible than copper, personally id go with the silicone stuff I recon it would be more able to deal with the thermal load.

As the title I've gone and done it, could not resist the lure of the dark side any more,

I bought a DJI Mavic pro fly more combo off a friend in work, at a good discount I must add, hence resistance was futile, guess I need to fly it now lol.

Emax babyhawk r, much much much better option

Been there, done that!!!!!!

I'd wait for now on these let some internet chatter happen on them first. never really rated the diatone stuff so I'm sceptical

Dog you know that fc has battery in direct, and can handle up to 6s on the battery pads, you can then use current and battery monitoring, I think its the fact your trying to pull to much Ma from the pdb bec to run the fc that's causing you an issue, feed battery straight in to it and the fc has its ...

Bit Late to this thread but most newer FC's need to be in DFU mode for flashing these days, 2 ways to put in DFU mode, Push bootloader button or pads while connecting. Or connect FC go into cli and type DFU then save, then disconnect and go into flash screen and it should show in DFU mode up in the ...

Just go X9d plus and get the TBS crossfire setup, much more reliable, check it out mate it seems to be the benchmark ATM.

I used to have 2206 2300 cobra running off a 20a 4in1 in my FSGX so I don't think you'll have any issue on the 2600kv xnova in the 180 personally I never had a good feel for my 180 as compared to any of the 5" frames. The Xnova quad motors defo deserve more praise and use than what they have ha...

Probably very few now.