Headlights on my quad
Posted: Sat Feb 07, 2015 3:02 pm
After seeing one of Kevs vids and those white leds on the front I've decided to follow suit. So easy to see orientation with those..
I bought some led side lights for the jag but there not bright enough, so I've got them on quad now..Ive ordered some blue ones for the back as I don't like these strip leds I've got on, look so messy..
Thanks for the idea Kev
Here they are.
They don't have any marking on them to tell which is positive or negative, so I straightened the pins and connected then to a 3S lipo,
Then I marked each positive wire with a marker pen.
Next I soldered appropriately coloured wires on
Then used some heat shrink tubing to protect them
Used some CA glue to stick them to underside of motor arms
Then soldered the wires to the distribution board, and now I have headlights on my quad.. Simplz.
WORD OF WARNING
these leds are for a car and therefore rated at 12 volts ONLY, please DO NOT use with lipos greater than 3S
I bought some led side lights for the jag but there not bright enough, so I've got them on quad now..Ive ordered some blue ones for the back as I don't like these strip leds I've got on, look so messy..
Thanks for the idea Kev
Here they are.
They don't have any marking on them to tell which is positive or negative, so I straightened the pins and connected then to a 3S lipo,
Then I marked each positive wire with a marker pen.
Next I soldered appropriately coloured wires on
Then used some heat shrink tubing to protect them
Used some CA glue to stick them to underside of motor arms
Then soldered the wires to the distribution board, and now I have headlights on my quad.. Simplz.
WORD OF WARNING
these leds are for a car and therefore rated at 12 volts ONLY, please DO NOT use with lipos greater than 3S