My Sunday started first thing in the morning with a flight with my Gaui X3 that didn't last more than 10 sec
. The reason for the crash was that my Alireon servo when I switch from normal mode to stunt mode the heli would banked hard to the right
. The conclusion was that the servo wasn't working right. New servo no less
. While the Gaui was apart I started to switch electronics around to find out why my Tarot 450 DFC has constant high head speed when I went from normal mode to stunt mode and back to normal mode
. I tried switching AR7200BX, ESC and even changing settings, Nothing!. Finally I decided to change the motor "New one" back to the old one that I had on before. By golly, just dip me in poop and call me stinky
All of this dilemma that I was having was cause by the new motor that I just put in recently
, Go fiqure! So after many hours taking apart, testing,switching and putting back together again the two helis "X3/450" will have the chance to try both helis out this morning and see if I fixed it's ailment. I want to say "Thank you" to everyone for there suggestions. I hope that this will work and have a pleasant flight today vs yesterday beside the Temp. starting out at 83 degree at 4:00 am. Have a good day!
