ESC's for Multirotors

Transmitters, receivers, flight stability control systems, gps waypoint systems, etc.

Moderator: Moderators

Post Reply
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

ESC's for Multirotors

Post by Derek »

This may be a "duh" question but I feel that I have to ask it.

Can any esc be used on a multi rotor? Or are there specific esc's for multi rotors?

When I bought the Velotech esc's for my ECHO 290, the esc's were in the "Multirotor" section. When I bought the Afro esc's, they were in the "Multirotor secion. I'm just wondering if it's a "specific" thing.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
pvolcko
Site Admin
Site Admin
Posts: 2197
Joined: Thu Nov 06, 2014 3:18 pm
Location: Syracuse, NY
Contact:

Re: ESC's for Multirotors

Post by pvolcko »

There are escs and firmware with fast update rates that are designed for multi-rotors applications specifically. Don't know if those two are examples of that though. Sometimes multi-rotor targeted escs will have longer wire lead lengths or come with bec and non-bec option for making sets (only one bec needed). And there ends what I think is my knowledge on that. :-)
User avatar
Lee
Moderator
Moderator
Posts: 1824
Joined: Fri Nov 07, 2014 6:16 pm
Location: Tarifa, Spain

Re: ESC's for Multirotors

Post by Lee »

you can use many different escs. but now there are so many multi rotor specific escs. its not necessary to buy anything else.
GOBLIN 570------IKON
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot


Citizen #229
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: ESC's for Multirotors

Post by Derek »

What if I were looking for something in the 45-50amp range that was capable of 6S? Where would I find something like this?
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: ESC's for Multirotors

Post by Derek »

I did see these esc's, but I was thinking that a bit more "cushion" may be beneficial.

http://www.multirotorsuperstore.com/esc ... t-rdy.html
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
Stambo
Member
Member
Posts: 1349
Joined: Thu Nov 20, 2014 7:13 pm
Location: Whangarei New Zealand

Re: ESC's for Multirotors

Post by Stambo »

As the other guys have said, multirotor specific ESCs generally have faster refresh rate and response times however many non multirotor specific ESCs can be flashed to BLHeli which gives a massive performance boost for multirotors.
Here is what I found with a quick search.

https://github.com/bitdump/BLHeli/blob/ ... 20ESCs.pdf
RCX 250 Minquad FPV addiction
500 X quad FPV/AP platform
450 X quad set up for night flight
Multiple WLToys V911, V949, V959
Taranis, Turnigy 9X
Fatshark Predator, Immersion 5800 Duo
Trex 500 Esky Belt CP V2
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: ESC's for Multirotors

Post by Derek »

Thanks for that! Unfortunately it went open on my tablet. Ill check it out on my home PC when I get home in the morning.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
pvolcko
Site Admin
Site Admin
Posts: 2197
Joined: Thu Nov 06, 2014 3:18 pm
Location: Syracuse, NY
Contact:

Re: ESC's for Multirotors

Post by pvolcko »

45A per motor? That's a lot of lift. What you got cooking? :-)
User avatar
Stambo
Member
Member
Posts: 1349
Joined: Thu Nov 20, 2014 7:13 pm
Location: Whangarei New Zealand

Re: ESC's for Multirotors

Post by Stambo »

Hobbyking beer lift?
RCX 250 Minquad FPV addiction
500 X quad FPV/AP platform
450 X quad set up for night flight
Multiple WLToys V911, V949, V959
Taranis, Turnigy 9X
Fatshark Predator, Immersion 5800 Duo
Trex 500 Esky Belt CP V2
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: ESC's for Multirotors

Post by Derek »

How cool would that be, but no.

Im just wondering about a 450ish quad with four 6S 450 class heli motors and 8-10" props.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
User avatar
pvolcko
Site Admin
Site Admin
Posts: 2197
Joined: Thu Nov 06, 2014 3:18 pm
Location: Syracuse, NY
Contact:

Re: ESC's for Multirotors

Post by pvolcko »

Heh... Damn dude. This ought to be interesting. :)
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
User avatar
Lee
Moderator
Moderator
Posts: 1824
Joined: Fri Nov 07, 2014 6:16 pm
Location: Tarifa, Spain

Re: ESC's for Multirotors

Post by Lee »

Those escs are good Derek.
Thats what Dan, Graham, and I run, in the 20A version.
Have a look at this. It Malc from RCUKTV. He flies at night, with night vision cameras, because he suffers from insomnia.

https://www.youtube.com/watch?v=-MeBKnZqwBw
GOBLIN 570------IKON
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot


Citizen #229
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: ESC's for Multirotors

Post by Derek »

Is this a project im going to pursue? I cant answer that right now...im shopping and pricing
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
Post Reply

Return to “Control Electronics”