RC-Hangout

Hi guys. I've got my CC3D set up on my 250 quad.. Flight modes are set to attitude, rattitude, & acro... I've also got some preliminary expo settings done (in the Tx)... This morning I left rattitude mode for acro to get a feel of what I thought I'd like to change... Love acro by the way.. Anyhow.. I don't want to mess with this Bank at all.. I'd like to do as I do with iKon & copy this Bank1 to Bank2.. Making adjustments to Bank2.. Leaving Bank1 as an "out" if u will upon finding trouble mid flight.. In Open Pilot Ground Station I see tabs for Banks 1,2, & 3.. but no switch assignment... Where in Groundstation do I set the Tx switch to toggle Banks?

On a different note.. I'm finding some settings I like on this that I'd never do on a heli.. Expo for example... On Helis I use 20% L, 15% M, & 10% H.. I'll switch between them depending on how my thumbs feel & if I'm on my game at any given time.. One this quad... If in attitude I don't want any expo.. Rattitude I like around 15-20%.. On acro I'm using 60% and it feels awesome! Never would have imagined I'd use that much on any type of bird.. Rudder/yaw never gets expo.. On anything.. Just seems weird! I think I need to set these in the Groundstation tho.. Having them set in my Tx means that as I toggle into different flight modes.. I also have to toggle the rates to match.. Yeah.. Think that's how I'll do it.

Ive set mine up like a 3d plane high flip and rolls rates and tons of expo (65% in FC and another 20% or 0% in the tx). the extra 20% expo is a new thing but it has helped smooth things out lots.

Ive tryed using slower fip+roll rates but it doesnt feel right, that 20% tx expo makes it just nice

As for the other modes i dont have them set up, only rate mode with different sets of gains.

I have flight modes and banks on the same switch.
I fly all in acro and just have the bank set up, so 1 is my good settings, and 2, 3 for tuning.

Fantastic... Where in ground staion is the bank assignment menu?