Transmitters, Receivers, Gyros, FBLs, Telemetry
	Moderator:  Moderators 
			
		
		
			
				
								DOG 							 
						Member 			
		Posts:  1786 Joined:  Fri Mar 06, 2015 4:03 amLocation:  Inverness Florida 
		
						
					
													
							
						
									
						Post 
					 
								by DOG  Mon Feb 08, 2016 12:30 am 
			
			
			
			
			Hey everyone, I done mess up and broke one of the switches on my Spektrum DX6  
 The switch located on the left side on top. 
P2070002.JPG
 Now is it easier to get the part and fix it my self which I'm not really sure how or send the TX in and get it done by someone who knows how?
 Who does carry one of theses switches? OR can I use a switch from another Radio?  
  Any help will be appreciated.  
HK 500 DFC 
						 
		 
				
		
		 
	 
				
		
		
			
				
								murankar 							 
						Supporter 			
		Posts:  1557 Joined:  Sat Nov 08, 2014 5:29 pmLocation:  Mentor, Ohio 
		
						
					
													
							
						
									
						Post 
					 
								by murankar  Mon Feb 08, 2016 12:49 am 
			
			
			
			
			Normally you would just order a switch and solder it in.  If you want the exact part then contact spektrum and order it.  As for sending it in, you could but you will pay for the round trip shipping and for parts and labor.  I am not sure if it would be considered warranty work.
			
			
									
									Matthias "URI X3" Urankar  | Citizen 00742 Gaui X3 BK BL 3001 HV, BL 5005 HV Scorpion HK 2520-3500 Kv  Specktrum DX6, VControl PowerLabs PL6 Pulse Ultra 2250, 35C 
						 
		 
				
		
		 
	 
				
		
		
			
				
								DOG 							 
						Member 			
		Posts:  1786 Joined:  Fri Mar 06, 2015 4:03 amLocation:  Inverness Florida 
		
						
					
													
							
						
									
						Post 
					 
								by DOG  Mon Feb 08, 2016 1:06 am 
			
			
			
			
			Well I hate to send it in then. That was my flight mode switch letter B "N-S1-S2" Now I'm going to use my G switch for my flight mode. My question is if that switch is broken, will it interfere with the other function of the radio?
			
			
									
									HK 500 DFC 
						 
		 
				
		
		 
	 
				
		
		
			
				
								murankar 							 
						Supporter 			
		Posts:  1557 Joined:  Sat Nov 08, 2014 5:29 pmLocation:  Mentor, Ohio 
		
						
					
													
							
						
									
						Post 
					 
								by murankar  Mon Feb 08, 2016 3:25 am 
			
			
			
			
			Shouldn't, your just short a switch.  That switch is threeway, if you have a dx6i then that flight mode switch should work as a quick fix.  Call SPecktrum and see if you can order that one switch.
			
			
									
									Matthias "URI X3" Urankar  | Citizen 00742 Gaui X3 BK BL 3001 HV, BL 5005 HV Scorpion HK 2520-3500 Kv  Specktrum DX6, VControl PowerLabs PL6 Pulse Ultra 2250, 35C 
						 
		 
				
		
		 
	 
				
		
		
			
				
								Superbad 							 
						Member 			
		Posts:  641 Joined:  Sat Nov 08, 2014 12:22 amLocation:  TEXAS 
		
						
					
													
							
						
									
						Post 
					 
								by Superbad  Mon Feb 08, 2016 3:58 am 
			
			
			
			
			This switch should work    I would call and make sure 
http://www.horizonhobby.com/product/hel ... mnt3627005 
They are easy to put in    If you need it done let me know
JESSE  DX 8 LYNX and Oxy Heli N. TX Field REP OXY   3 IKON  KST 215 Servos OXY  4   Switch BladesIKON 2  Align T REX  550e V2 DFC head Scorpion 4025 1100KV  IKON  HW 100a  ESC  RAIL BLADES 
						 
		 
				
		
		 
	 
				
		
		
			
				
								DOG 							 
						Member 			
		Posts:  1786 Joined:  Fri Mar 06, 2015 4:03 amLocation:  Inverness Florida 
		
						
					
													
							
						
									
						Post 
					 
								by DOG  Mon Feb 08, 2016 5:03 am 
			
			
			
			
			
Thank you for the information and the offer superbad. I'm going to order one and see if I can install myself. If not, I will let you know. Thanks  
HK 500 DFC 
						 
		 
				
		
		 
	 
				
		
		
			
				
								Superbad 							 
						Member 			
		Posts:  641 Joined:  Sat Nov 08, 2014 12:22 amLocation:  TEXAS 
		
						
					
													
							
						
									
						Post 
					 
								by Superbad  Mon Feb 08, 2016 5:43 am 
			
			
			
			
			[/quote]Thank you for the information and the offer superbad. I'm going to order one and see if I can install myself. If not, I will let you know. Thanks  
[/quote]
They have a few listed   I would call  just to make sure .
You also can pick these switches up  at Radio shack  if you have any around you 
Just open up the tx and get the amp and volt specks of the switch
JESSE  DX 8 LYNX and Oxy Heli N. TX Field REP OXY   3 IKON  KST 215 Servos OXY  4   Switch BladesIKON 2  Align T REX  550e V2 DFC head Scorpion 4025 1100KV  IKON  HW 100a  ESC  RAIL BLADES 
						 
		 
				
		
		 
	 
				
		
		
			
				
								DOG 							 
						Member 			
		Posts:  1786 Joined:  Fri Mar 06, 2015 4:03 amLocation:  Inverness Florida 
		
						
					
													
							
						
									
						Post 
					 
								by DOG  Mon Feb 08, 2016 5:53 am 
			
			
			
			
			Radio shack, I will check them out. Cool, that way I don't have to deal with shipping and waiting for the parts to arrive. 
HK 500 DFC 
						 
		 
				
		
		 
	 
				
		
		
			
				
								murankar 							 
						Supporter 			
		Posts:  1557 Joined:  Sat Nov 08, 2014 5:29 pmLocation:  Mentor, Ohio 
		
						
					
													
							
						
									
						Post 
					 
								by murankar  Mon Feb 08, 2016 6:55 am 
			
			
			
			
			Radio shack I think went out of business.
			
			
									
									Matthias "URI X3" Urankar  | Citizen 00742 Gaui X3 BK BL 3001 HV, BL 5005 HV Scorpion HK 2520-3500 Kv  Specktrum DX6, VControl PowerLabs PL6 Pulse Ultra 2250, 35C 
						 
		 
				
		
		 
	 
				
		
		
			
				
								danhampson 							 
						Site Admin 			
		Posts:  1746 Joined:  Thu Nov 06, 2014 2:54 pmLocation:  Manchester, United Kingdom
				Contact: 
				
			 
				
		 
		
						
					
													
							
						
									
						Post 
					 
								by danhampson  Mon Feb 08, 2016 2:10 pm 
			
			
			
			
			ive just done a quick search and they have shut some of there stores but there is still one in inverness florida, heres the address and phone number.
			
			
									
									FPV addict.
						 
		 
				
		
		 
	 
				
		
		
			
				
								DOG 							 
						Member 			
		Posts:  1786 Joined:  Fri Mar 06, 2015 4:03 amLocation:  Inverness Florida 
		
						
					
													
							
						
									
						Post 
					 
								by DOG  Mon Feb 08, 2016 4:49 pm 
			
			
			
			
			danhampson wrote: ive just done a quick search and they have shut some of there stores but there is still one in inverness florida, heres the address and phone number.
Thank you, that's the one I'll be going to. One of the few.
HK 500 DFC 
						 
		 
				
		
		 
	 
				
		
		
			
				
								murankar 							 
						Supporter 			
		Posts:  1557 Joined:  Sat Nov 08, 2014 5:29 pmLocation:  Mentor, Ohio 
		
						
					
													
							
						
									
						Post 
					 
								by murankar  Mon Feb 08, 2016 8:01 pm 
			
			
			
			
			Up in my area they all closed.  We had three stores and now we have none.  That's why I thought they went out of business.
			
			
									
									Matthias "URI X3" Urankar  | Citizen 00742 Gaui X3 BK BL 3001 HV, BL 5005 HV Scorpion HK 2520-3500 Kv  Specktrum DX6, VControl PowerLabs PL6 Pulse Ultra 2250, 35C 
						 
		 
				
		
		 
	 
				
		
		
			
				
								Graham Lawrie 							 
						Moderator 			
		Posts:  5049 Joined:  Thu Nov 06, 2014 7:14 pmLocation:  Kinlochleven, Scotland
				Contact: 
				
			 
				
		 
		
						
					
													
							
						
									
						Post 
					 
								by Graham Lawrie  Mon Feb 08, 2016 8:06 pm 
			
			
			
			
			Horizon Hobby in the UK send these out free of charge:)
			
			
									
									Align 600 Align 550 Align 450 Pro V2 AR7200BX Align150 Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt DX6i MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD Blade mqx Scorpion BUG Fatshark Predator V2 & Mobius CITIZEN # 521 
						 
		 
				
		
		 
	 
				
		
		
			
				
								danhampson 							 
						Site Admin 			
		Posts:  1746 Joined:  Thu Nov 06, 2014 2:54 pmLocation:  Manchester, United Kingdom
				Contact: 
				
			 
				
		 
		
						
					
													
							
						
									
						Post 
					 
								by danhampson  Mon Feb 08, 2016 8:08 pm 
			
			
			
			
			murankar wrote: Up in my area they all closed.  We had three stores and now we have none.  That's why I thought they went out of business.
We used to have Tandy (UK radio shack), they have been gone for a hood 10+ years.  
FPV addict.
						 
		 
				
		
		 
	 
				
		
		
			
				
								murankar 							 
						Supporter 			
		Posts:  1557 Joined:  Sat Nov 08, 2014 5:29 pmLocation:  Mentor, Ohio 
		
						
					
													
							
						
									
						Post 
					 
								by murankar  Mon Feb 08, 2016 11:16 pm 
			
			
			
			
			Tandy was a radio shack brand when computers were first introduced as a consumer product.
			
			
									
									Matthias "URI X3" Urankar  | Citizen 00742 Gaui X3 BK BL 3001 HV, BL 5005 HV Scorpion HK 2520-3500 Kv  Specktrum DX6, VControl PowerLabs PL6 Pulse Ultra 2250, 35C 
						 
		 
				
		
		 
	 
				
		
		
			
				
								Superbad 							 
						Member 			
		Posts:  641 Joined:  Sat Nov 08, 2014 12:22 amLocation:  TEXAS 
		
						
					
													
							
						
									
						Post 
					 
								by Superbad  Mon Feb 08, 2016 11:23 pm 
			
			
			
			
			Radio Shack is a brand from Tandy corp.    My Granddad  worked for them for many years
			
			
									
									JESSE  DX 8 LYNX and Oxy Heli N. TX Field REP OXY   3 IKON  KST 215 Servos OXY  4   Switch BladesIKON 2  Align T REX  550e V2 DFC head Scorpion 4025 1100KV  IKON  HW 100a  ESC  RAIL BLADES 
						 
		 
				
		
		 
	 
				
		
		
			
				
								murankar 							 
						Supporter 			
		Posts:  1557 Joined:  Sat Nov 08, 2014 5:29 pmLocation:  Mentor, Ohio 
		
						
					
													
							
						
									
						Post 
					 
								by murankar  Tue Feb 09, 2016 1:12 am 
			
			
			
			
			Ah shoot here we go.  Okay you win.
			
			
									
									Matthias "URI X3" Urankar  | Citizen 00742 Gaui X3 BK BL 3001 HV, BL 5005 HV Scorpion HK 2520-3500 Kv  Specktrum DX6, VControl PowerLabs PL6 Pulse Ultra 2250, 35C 
						 
		 
				
		
		 
	 
				
		
		
			
				
								Superbad 							 
						Member 			
		Posts:  641 Joined:  Sat Nov 08, 2014 12:22 amLocation:  TEXAS 
		
						
					
													
							
						
									
						Post 
					 
								by Superbad  Tue Feb 09, 2016 1:51 am 
			
			
			
			
			murankar wrote: Ah shoot here we go.  Okay you win.
LOL
Us old people know alot
JESSE  DX 8 LYNX and Oxy Heli N. TX Field REP OXY   3 IKON  KST 215 Servos OXY  4   Switch BladesIKON 2  Align T REX  550e V2 DFC head Scorpion 4025 1100KV  IKON  HW 100a  ESC  RAIL BLADES 
						 
		 
				
		
		 
	 
				
		
		
			
				
								murankar 							 
						Supporter 			
		Posts:  1557 Joined:  Sat Nov 08, 2014 5:29 pmLocation:  Mentor, Ohio 
		
						
					
													
							
						
									
						Post 
					 
								by murankar  Tue Feb 09, 2016 3:01 am 
			
			
			
			
			I thought I knew it.  Guess not.
			
			
									
									Matthias "URI X3" Urankar  | Citizen 00742 Gaui X3 BK BL 3001 HV, BL 5005 HV Scorpion HK 2520-3500 Kv  Specktrum DX6, VControl PowerLabs PL6 Pulse Ultra 2250, 35C 
						 
		 
				
		
		 
	 
				
		
		
			
				
								DOG 							 
						Member 			
		Posts:  1786 Joined:  Fri Mar 06, 2015 4:03 amLocation:  Inverness Florida 
		
						
					
													
							
						
									
						Post 
					 
								by DOG  Tue Feb 09, 2016 4:56 am 
			
			
			
			
			murankar wrote: I thought I knew it.  Guess not.
I knew it but I forgot  
HK 500 DFC