I Have A Woody :)

Discussion, questions, builds, and tutorials on mid-size mutli-rotors, 300 up to 600 size.

Moderator: Moderators

Post Reply
User avatar
Stambo
Member
Member
Posts: 1349
Joined: Thu Nov 20, 2014 7:13 pm
Location: Whangarei New Zealand

I Have A Woody :)

Post by Stambo »

Get your mind out of the gutter, I am talking about my wooden framed quad. :)
I have built the frame and mounted the motors, just working out where to run wires and mount everything else.
At the moment it has 8" props on 300w 1100kv motors although 9" will just fit.
It will run 4s batteries.
I have a second vibration isolated level planned that will carry the battery, FPV and Mobius cameras and flight controller.
Motors are supposedly good for 1130 grams thrust for a total of 4520.
Flying weight will be around 1500 grams giving me a 3 to 1 ratio.
This thing should haul. :)
P1060276.JPG
P1060276.JPG (1.98 MiB) Viewed 6096 times
P1060277.JPG
P1060277.JPG (1.77 MiB) Viewed 6096 times
RCX 250 Minquad FPV addiction
500 X quad FPV/AP platform
450 X quad set up for night flight
Multiple WLToys V911, V949, V959
Taranis, Turnigy 9X
Fatshark Predator, Immersion 5800 Duo
Trex 500 Esky Belt CP V2
Top
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: I Have A Woody :)

Post by Tony »

That's an unusual quad Stambo, do you think it will survive well in a crash, especially at your speeds...lol
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Top
User avatar
Stambo
Member
Member
Posts: 1349
Joined: Thu Nov 20, 2014 7:13 pm
Location: Whangarei New Zealand

Re: I Have A Woody :)

Post by Stambo »

Probably not, but it's not really being built for low altitude risky flying, more for moderate altitude insane speed. :D
I have plenty more wood for spare parts. :)
RCX 250 Minquad FPV addiction
500 X quad FPV/AP platform
450 X quad set up for night flight
Multiple WLToys V911, V949, V959
Taranis, Turnigy 9X
Fatshark Predator, Immersion 5800 Duo
Trex 500 Esky Belt CP V2
Top
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: I Have A Woody :)

Post by Tony »

Looking forward to seeing it in the air. Certainly looks an incredibly simple quad to build...
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Top
User avatar
DOG
Member
Member
Posts: 1786
Joined: Fri Mar 06, 2015 4:03 am
Location: Inverness Florida

Re: I Have A Woody :)

Post by DOG »

Hey stambo. that is a unique quad that you're building there. Do you have some sort of diagram that you are going by or are you just winging it? Either way, i like it and good luck on the build. Different but cleaver.
HK 500 DFC
Gaui X3L
Tarot 450DFC scale/Coastguard
Fossil 180
Fossil 210
Citizen member #00748
Top
User avatar
Stambo
Member
Member
Posts: 1349
Joined: Thu Nov 20, 2014 7:13 pm
Location: Whangarei New Zealand

Re: I Have A Woody :)

Post by Stambo »

DOG wrote:Hey stambo. that is a unique quad that you're building there. Do you have some sort of diagram that you are going by or are you just winging it? Either way, i like it and good luck on the build. Different but cleaver.
I started with a diagram but pretty much made it up as I went along.
RCX 250 Minquad FPV addiction
500 X quad FPV/AP platform
450 X quad set up for night flight
Multiple WLToys V911, V949, V959
Taranis, Turnigy 9X
Fatshark Predator, Immersion 5800 Duo
Trex 500 Esky Belt CP V2
Top
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: I Have A Woody :)

Post by Derek »

Really cool, Stambo! 8" props....that thing should be a screamer!!!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
Top
User avatar
cml001
Supporter
Supporter
Posts: 2882
Joined: Fri Nov 07, 2014 4:46 pm
Location: Augusta GA

Re: I Have A Woody :)

Post by cml001 »

Looks good bruh!
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Top
User avatar
Stambo
Member
Member
Posts: 1349
Joined: Thu Nov 20, 2014 7:13 pm
Location: Whangarei New Zealand

Re: I Have A Woody :)

Post by Stambo »

Bit more progress on the woody.
Woody1.jpg
Woody1.jpg (456.62 KiB) Viewed 6064 times
The ESCs were supposed to fit inside the frame but due to a slight technical error during the measurement phase they don't. :)
Woody2.jpg
Woody2.jpg (457.26 KiB) Viewed 6064 times
The motors will be screwed on before the maiden, I attached them with zip ties as I don't have the screws I need to secure them and I wanted to see how everything fit.
I certainly won't be trusting this sort of power with zip ties, although I did do a little hop in the lounge to make sure everything worked.
All going well I should have a maiden flight this weekend.
I will attach the mobius for some on board footage and if everything goes well I will FPV it soon after.
This thing should be crazy fast and I am expecting up to 15 minutes flight time with those 4s 5000s on it.
Overkill with such a big battery I know but it's what I have. :)
RCX 250 Minquad FPV addiction
500 X quad FPV/AP platform
450 X quad set up for night flight
Multiple WLToys V911, V949, V959
Taranis, Turnigy 9X
Fatshark Predator, Immersion 5800 Duo
Trex 500 Esky Belt CP V2
Top
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: I Have A Woody :)

Post by Tony »

Looks cool Stambo..
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Top
User avatar
danhampson
Site Admin
Site Admin
Posts: 1746
Joined: Thu Nov 06, 2014 2:54 pm
Location: Manchester, United Kingdom
Contact:
Contact danhampson

Re: I Have A Woody :)

Post by danhampson »

Looks good Stambo. It should have loads of power even with that huge pack.
FPV addict.
Top
User avatar
Stambo
Member
Member
Posts: 1349
Joined: Thu Nov 20, 2014 7:13 pm
Location: Whangarei New Zealand

Re: I Have A Woody :)

Post by Stambo »

First flight of my home made wooden 330 H quad.
Way to windy for a maiden but when has that ever stopped me.
You can see when I switch from Angle to Acro how much smoother the flight gets.
The Naze32 has had very little tuning as yet.
The little crash did no damage at all however I think in a big one this thing will be match sticks.
The beauty is for about $20 I got enough material to build at least 4 of these.

Specs
Naze32 acro
30a Simonk flashed ESCs
Turnigy 330w 1100kv motors
8045 props
4s 5000 35c battery (old and tired ones)
All up weight including battery less than 1.5kg
Reported motor thrust 4.5kg (3 to 1 ratio)
I have room for 9" props so I might give that a go too.
I can't wait to get my FPV gear on this thing, and maybe my OSD as well to measure speed etc.


https://www.youtube.com/watch?v=Fe3gnBlwhXo
Last edited by Stambo on Fri May 08, 2015 12:27 am, edited 1 time in total.
RCX 250 Minquad FPV addiction
500 X quad FPV/AP platform
450 X quad set up for night flight
Multiple WLToys V911, V949, V959
Taranis, Turnigy 9X
Fatshark Predator, Immersion 5800 Duo
Trex 500 Esky Belt CP V2
Top
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: I Have A Woody :)

Post by Tony »

This is frustrating waiting for this vid.... Lmao...
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Top
User avatar
KevG
Supporter
Supporter
Posts: 1642
Joined: Fri Nov 07, 2014 4:59 pm
Location: South Wales, UK

Re: I Have A Woody :)

Post by KevG »

Looking good stambo
Minor league Aviator, against gravity which normally wins!

RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
Top
User avatar
danhampson
Site Admin
Site Admin
Posts: 1746
Joined: Thu Nov 06, 2014 2:54 pm
Location: Manchester, United Kingdom
Contact:
Contact danhampson

Re: I Have A Woody :)

Post by danhampson »

Wow I looks like it's got a shed load of power. Nice flight.
FPV addict.
Top
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: I Have A Woody :)

Post by Tony »

That's truly awesome for a wooden quad.... Wow, sounds like those motors are just ticking over.... Excellent maiden
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Top
Post Reply

Return to “Mid-size Multis”