1st Annual RC-Hangout Fun Fly?!?!?!... North American
Moderator: Moderators
1st Annual RC-Hangout Fun Fly?!?!?!... North American
Hey guys.. Quick poll... How many members are in the US... & where? I'd like to say entirely.... But not sure many would pay to cross the pond... If u r willing.. Throw ur name in the hat! lets see if we can put together an annual fun fly for members... Find a center location between stateside members & meet for a weekendin that locations "good" weather are... Who's down?
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: 1st Annual RC-Hangout Fun Fly?!?!?!... North American
I think it's a good idea but I also think it would be really hard to pull off. I'm in NE Indiana. Kyle is about an hour north of me. Ken is about 2 hours, I think, to the northwest of me in Illinois. Matthias is probably about 5 hours to the east of me in Ohio. Paul is in New York. You (Clay) and DOG are our southeastern members. Dustin is down there, too, in Louisiana. I dunno...perhaps a meeting place in southern Kentucky or Northern Tennessee. This would be cool if it could be done!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Re: 1st Annual RC-Hangout Fun Fly?!?!?!... North American
It can be done... It'd be a drive for all of us yes.. Thought it would be nice for us to meet up for a weekend... Holla if ur willing.
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: 1st Annual RC-Hangout Fun Fly?!?!?!... North American
So in looking at a quick Google search... There are a few fields in mid eastern Kentuky... That's about 6-7hrs drive time for me.. What's that look like for u guys? I'm pretty serious about this...
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
- Graham Lawrie
- Moderator
- Posts: 5049
- Joined: Thu Nov 06, 2014 7:14 pm
- Location: Kinlochleven, Scotland
- Contact:
Re: 1st Annual RC-Hangout Fun Fly?!?!?!... North American
Count me out:( unless i win the lottery between now and the meet:) in which case i would pay for all of us:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Re: 1st Annual RC-Hangout Fun Fly?!?!?!... North American
To be honest with you, Clay...I'd be ok with a 6-7 hour drive to meet up with a group of us. I was just looking at MapQuest. According to MapQuest, I can get to Lexington, KY in about 5 hours. I dunno, maybe this would be more possible than I thought. As it stands right now, I can't promise that I can be there for a Fun Fly but keep me on the "Possible" list.cml001 wrote:So in looking at a quick Google search... There are a few fields in mid eastern Kentuky... That's about 6-7hrs drive time for me.. What's that look like for u guys? I'm pretty serious about this...
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Re: 1st Annual RC-Hangout Fun Fly?!?!?!... North American
Graham Lawrie wrote:Count me out:( unless i win the lottery between now and the meet:) in which case i would pay for all of us:)
Werd! Same goes for me if I would to hit it for a lick... We'd be meeting in ur side of the pond tho! Lol
Derek, it's way possible.. And if we all plan it together it would work fantastically!
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: 1st Annual RC-Hangout Fun Fly?!?!?!... North American
That's a 10hr drive for me. Frankly, if I'm going to drive that far to meet up with you guys, it might as well be at IRCHA or one of the other big events in Muncie at AMA HQ. Two birds with one packed SUV. 
I like the idea of a meetup, but I'm partial to co-locating and timing the meetup with an existing event so we can piggyback on it. Removes the headaches of arranging a field to fly at, getting any insurance for the event, food, hotels, facilities, etc. Not to mention trying to get people to make separate time for a forum meetup/funfly in the rest of their annual plans.

I like the idea of a meetup, but I'm partial to co-locating and timing the meetup with an existing event so we can piggyback on it. Removes the headaches of arranging a field to fly at, getting any insurance for the event, food, hotels, facilities, etc. Not to mention trying to get people to make separate time for a forum meetup/funfly in the rest of their annual plans.
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
Re: 1st Annual RC-Hangout Fun Fly?!?!?!... North American
Well.... We could move the meet closer to u & try to even out the drive time for each of us.. I was thinking tent, not hotel(maybe one night just for use of a shower:) ).. Cooler & grill for most of the eating... Each using our AMA for insurance, shouldn't be any other needed. Piggy back'n on an event is cool... But u don't get to fly much at those BIG events.. I usually fly more than watch others up & down the line. But.. No one else is posting.. Guess it's a bust.
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: 1st Annual RC-Hangout Fun Fly?!?!?!... North American
I am about 5 hours north of Louisville KY, or 6.5 hours north of Elizabethtown KY or E-town for short. My truck to munci is about 5 hours. I might be able to but I will need to post my blackout dates for the spring summer and early fall months. My blackout dates would be my army weekends.
Matthias "URI X3" Urankar | Citizen 00742
Kit: Gaui X3
Servos: BK BL 3001 HV, BL 5005 HV
Motor: Scorpion HK 2520-3500 Kv
TX/RX: Specktrum DX6, VControl
Charger: PowerLabs PL6
Batteries: Pulse Ultra 2250, 35C
Kit: Gaui X3
Servos: BK BL 3001 HV, BL 5005 HV
Motor: Scorpion HK 2520-3500 Kv
TX/RX: Specktrum DX6, VControl
Charger: PowerLabs PL6
Batteries: Pulse Ultra 2250, 35C
Re: 1st Annual RC-Hangout Fun Fly?!?!?!... North American
I don't know if I could fly my planes at IRCHA....hmmmmm
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Re: 1st Annual RC-Hangout Fun Fly?!?!?!... North American
Just giving you an idea how far from you I live.
Central would be somewhere around Kentucky or west end of Virginia.
Central would be somewhere around Kentucky or west end of Virginia.
Matthias "URI X3" Urankar | Citizen 00742
Kit: Gaui X3
Servos: BK BL 3001 HV, BL 5005 HV
Motor: Scorpion HK 2520-3500 Kv
TX/RX: Specktrum DX6, VControl
Charger: PowerLabs PL6
Batteries: Pulse Ultra 2250, 35C
Kit: Gaui X3
Servos: BK BL 3001 HV, BL 5005 HV
Motor: Scorpion HK 2520-3500 Kv
TX/RX: Specktrum DX6, VControl
Charger: PowerLabs PL6
Batteries: Pulse Ultra 2250, 35C
Re: 1st Annual RC-Hangout Fun Fly?!?!?!... North American
I'm thinking that's within 1-2hours of everybody... But before I go trying to define logistics... Who all is down for it? If u guys want I'll search fields within as close to a central location as I can.. Guess I'll also try to nail down lodging, & I was thinking spring time... I need to schedule vacation time at work as I'm sure the rest of u do. But as I said... Before I go call'n people to set this up.. I need to know who's in. Tell ya what.. I'll give the thread a week.. Let's say Nov 6th.. If u want to make this happen post ur vote... A simple YES or NO.. If the majority want to do as I do, I'll set up all the logistics after we determine a date we could do it.
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: 1st Annual RC-Hangout Fun Fly?!?!?!... North American
YES
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: 1st Annual RC-Hangout Fun Fly?!?!?!... North American
YA'll For get about me Im way out here in TEXAS
Were you all are talking thats a 12+ hour drive for me
Were you all are talking thats a 12+ hour drive for me
JESSE DX8
LYNX and Oxy Heli N. TX Field REP
OXY 3IKON KST 215 Servos
OXY 4 Switch BladesIKON 2
Align T REX 550e V2 DFC head Scorpion 4025 1100KV IKON HW 100a ESC RAIL BLADES
LYNX and Oxy Heli N. TX Field REP
OXY 3IKON KST 215 Servos
OXY 4 Switch BladesIKON 2
Align T REX 550e V2 DFC head Scorpion 4025 1100KV IKON HW 100a ESC RAIL BLADES
Re: 1st Annual RC-Hangout Fun Fly?!?!?!... North American
Type in yes or no... Gonna do our best to centralize the location!
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: 1st Annual RC-Hangout Fun Fly?!?!?!... North American
If things workout yes. This is a 60% yes.
Matthias "URI X3" Urankar | Citizen 00742
Kit: Gaui X3
Servos: BK BL 3001 HV, BL 5005 HV
Motor: Scorpion HK 2520-3500 Kv
TX/RX: Specktrum DX6, VControl
Charger: PowerLabs PL6
Batteries: Pulse Ultra 2250, 35C
Kit: Gaui X3
Servos: BK BL 3001 HV, BL 5005 HV
Motor: Scorpion HK 2520-3500 Kv
TX/RX: Specktrum DX6, VControl
Charger: PowerLabs PL6
Batteries: Pulse Ultra 2250, 35C
Re: 1st Annual RC-Hangout Fun Fly?!?!?!... North American
Yes. Might have to rent something to fly, if I have to fly there instead of drive. But yes.
Re: 1st Annual RC-Hangout Fun Fly?!?!?!... North American
That's what I'm talk' bout... That's 3 yes(including myself)... Matthias, need to step that 60% on up to 100%! Lol.. Paul, if u were to fly.. U could box up & mail a bird or two. I'd receive it & bring it along.. Could mail it back to u as well.. Just have to pull the blades & possibly the boom.. Wouldn't be too much trouble... Could take it wil u if u had a hard case... Ok.. That's 3! Where are all my RC-Hangout brothers at?!?!?!
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: 1st Annual RC-Hangout Fun Fly?!?!?!... North American
right now time from work could be my issue and possibly some cash flow depending on how much i need to spend for the weekend. I do have the money but right now with the divorce things could get dicey. so its going to be a month to month. Early spring maybe to early to coordinate this. Most folks plan a year out on things like this. Still going to say yes because I will never know for sure till a couple months out.
Matthias "URI X3" Urankar | Citizen 00742
Kit: Gaui X3
Servos: BK BL 3001 HV, BL 5005 HV
Motor: Scorpion HK 2520-3500 Kv
TX/RX: Specktrum DX6, VControl
Charger: PowerLabs PL6
Batteries: Pulse Ultra 2250, 35C
Kit: Gaui X3
Servos: BK BL 3001 HV, BL 5005 HV
Motor: Scorpion HK 2520-3500 Kv
TX/RX: Specktrum DX6, VControl
Charger: PowerLabs PL6
Batteries: Pulse Ultra 2250, 35C