Gemini V2 UAV Build Thread

Got a new project going on? Document your builds of aircraft here. Video and pictures highly encouraged!

Moderator: Moderators

Forum rules
Please post one thread per aircraft or project. If you're doing a rebuild or major make over of an existing aircraft you can start a new thread, but you are encouraged to cross link the new thread and original build thread so people can easily see the history of your aircraft.
Post Reply
User avatar
DOG
Member
Member
Posts: 1786
Joined: Fri Mar 06, 2015 4:03 am
Location: Inverness Florida

Re: Gemini V2 UAV Build Thread

Post by DOG »

Sweet 8-) Looks like the wings are going to be as big as the fuselage :o
HK 500 DFC
Gaui X3L
Tarot 450DFC scale/Coastguard
Fossil 180
Fossil 210
Citizen member #00748
Top
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Gemini V2 UAV Build Thread

Post by Derek »

64" fuselage. 120" wingspan
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
Top
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Gemini V2 UAV Build Thread

Post by Derek »

Center wing section is nearly done. Measuring 23 3/4 inches from left to right
20180302_144107.jpg
20180302_144107.jpg (2.13 MiB) Viewed 20984 times
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
Top
User avatar
Graham Lawrie
Moderator
Moderator
Posts: 5049
Joined: Thu Nov 06, 2014 7:14 pm
Location: Kinlochleven, Scotland
Contact:
Contact Graham Lawrie

Re: Gemini V2 UAV Build Thread

Post by Graham Lawrie »

Sweet:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius




CITIZEN # 521
Top
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Gemini V2 UAV Build Thread

Post by Derek »

Here are the two inner parts of the main wing halves. This is where the dyherdral will begin
20180311_035448.jpg
20180311_035448.jpg (2.68 MiB) Viewed 20942 times
Here are the 26 main wing ribs. 3/32 balsa. 11 1/2" long each. 13 ribs on each side.
20180311_035455.jpg
20180311_035455.jpg (2.65 MiB) Viewed 20942 times
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
Top
User avatar
Graham Lawrie
Moderator
Moderator
Posts: 5049
Joined: Thu Nov 06, 2014 7:14 pm
Location: Kinlochleven, Scotland
Contact:
Contact Graham Lawrie

Re: Gemini V2 UAV Build Thread

Post by Graham Lawrie »

That looks big:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius




CITIZEN # 521
Top
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Gemini V2 UAV Build Thread

Post by Derek »

It should be very close to 3.2 meters (10 feet) wingspan when its done.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
Top
User avatar
DOG
Member
Member
Posts: 1786
Joined: Fri Mar 06, 2015 4:03 am
Location: Inverness Florida

Re: Gemini V2 UAV Build Thread

Post by DOG »

8-) Looking good Derek. Moving right alone you are :)
HK 500 DFC
Gaui X3L
Tarot 450DFC scale/Coastguard
Fossil 180
Fossil 210
Citizen member #00748
Top
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Gemini V2 UAV Build Thread

Post by Derek »

I worked on the inner part of the main wing. At the outer tips of the inner parts, the dyhedral will begin. I couldnt help dry fitting these new pieces on top of the fuselage lol
20180312_015406.jpg
20180312_015406.jpg (2.88 MiB) Viewed 20924 times
20180312_015350.jpg
20180312_015350.jpg (2.85 MiB) Viewed 20924 times
20180312_015340.jpg
20180312_015340.jpg (2.89 MiB) Viewed 20924 times
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
Top
User avatar
Graham Lawrie
Moderator
Moderator
Posts: 5049
Joined: Thu Nov 06, 2014 7:14 pm
Location: Kinlochleven, Scotland
Contact:
Contact Graham Lawrie

Re: Gemini V2 UAV Build Thread

Post by Graham Lawrie »

That looks sooooooooo cool Derek:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius




CITIZEN # 521
Top
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Gemini V2 UAV Build Thread

Post by Derek »

Thanks very much, Graham!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
Top
User avatar
DOG
Member
Member
Posts: 1786
Joined: Fri Mar 06, 2015 4:03 am
Location: Inverness Florida

Re: Gemini V2 UAV Build Thread

Post by DOG »

ABSOLUTELY that is too cool and robust. Looks like a giant fortress that will fly 8-)
HK 500 DFC
Gaui X3L
Tarot 450DFC scale/Coastguard
Fossil 180
Fossil 210
Citizen member #00748
Top
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Gemini V2 UAV Build Thread

Post by Derek »

I've just ordered a bunch of stuff for my Gemini build

Taranis x9d+ with X8R receiver
2 Eflight Power 15 motors
2 Castle Creations Edge 50amp esc's
11 servos
2 vtx's
2 Runcam Eagle fpv cameras
Matek Powerhub PDB

There are some other things that Ive ordered but I can't remember what they were, lol.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
Top
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Gemini V2 UAV Build Thread

Post by Derek »

Starting to add the wing ribs to the main wing, right side
20180316_015856.jpg
20180316_015856.jpg (1.91 MiB) Viewed 20849 times
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
Top
User avatar
DOG
Member
Member
Posts: 1786
Joined: Fri Mar 06, 2015 4:03 am
Location: Inverness Florida

Re: Gemini V2 UAV Build Thread

Post by DOG »

Sweet Derek. Electronics on the way. It's coming together very nicely. Thanks for sharing Pics :)
HK 500 DFC
Gaui X3L
Tarot 450DFC scale/Coastguard
Fossil 180
Fossil 210
Citizen member #00748
Top
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Gemini V2 UAV Build Thread

Post by Derek »

Ive finally gotten started on the main wings. Wow! These are long! Lol. I dont have any pictures yet but im working on it.

Im disappointed that the wings wont have dyhedral though. Ive tried to build the dyhedral wings twice and both times i had a nasty twist in the wing and the dyhedral degrees didnt match up. So, ive opted to build the wing as a flat wing. It wont look as cool but it should still fly.
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
Top
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Gemini V2 UAV Build Thread

Post by Derek »

After nearly a month, my HK order finally showed up. Now i have my servos, fpv cameras, and Taranis for my Gemini build
20180406_164710.jpg
20180406_164710.jpg (2.38 MiB) Viewed 20648 times
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
Top
User avatar
DOG
Member
Member
Posts: 1786
Joined: Fri Mar 06, 2015 4:03 am
Location: Inverness Florida

Re: Gemini V2 UAV Build Thread

Post by DOG »

AHHHH! Very nice :). Now it's time to have some fun getting the electronics system put together. Enjoy!
HK 500 DFC
Gaui X3L
Tarot 450DFC scale/Coastguard
Fossil 180
Fossil 210
Citizen member #00748
Top
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: Gemini V2 UAV Build Thread

Post by Derek »

Here is 10 feet 7.5 inches of wing lol
20180406_183857.jpg
20180406_183857.jpg (2.26 MiB) Viewed 20642 times
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
Top
User avatar
DOG
Member
Member
Posts: 1786
Joined: Fri Mar 06, 2015 4:03 am
Location: Inverness Florida

Re: Gemini V2 UAV Build Thread

Post by DOG »

Mann, you can strap that on your back and then you can fly :lol: . Looking sweet Derek. Excellent job! :)
HK 500 DFC
Gaui X3L
Tarot 450DFC scale/Coastguard
Fossil 180
Fossil 210
Citizen member #00748
Top
Post Reply

Return to “Member Builds”