What did the postman bring today

Off-topic and general chat

Moderator: Moderators

Post Reply
User avatar
cml001
Supporter
Supporter
Posts: 2882
Joined: Fri Nov 07, 2014 4:46 pm
Location: Augusta GA

Re: What did the postman bring today

Post by cml001 »

Oh I need the .9one for my 450 skid set screws! But u have to buy the.. 1.2 I think.... To get it.. Only comes with the 1 .9mm & 2 1.2mm... Why?
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Top
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: What did the postman bring today

Post by Tony »

wolfman76 wrote:nice wrenches tony i have the brown handled align wrenches that also come with a phillips head bit.. i have two sets and use the 1.5mm all the time and have had them for over 2 years with not one issue not even one sign of it rounding one bit........ AND SHHHHHHHHHHH!!!!!!! about secret funds...
nice one Kyle.... i think everyone but the mrs knows about my heli spending....phew...
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Top
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: What did the postman bring today

Post by Tony »

cml001 wrote:Oh I need the .9one for my 450 skid set screws! But u have to buy the.. 1.2 I think.... To get it.. Only comes with the 1 .9mm & 2 1.2mm... Why?
they like to get at your secret stash bro.... lol, buy something you dont need to get something you do... !!!
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Top
User avatar
KevG
Supporter
Supporter
Posts: 1642
Joined: Fri Nov 07, 2014 4:59 pm
Location: South Wales, UK

Re: What did the postman bring today

Post by KevG »

cml001 wrote:Oh I need the .9one for my 450 skid set screws! But u have to buy the.. 1.2 I think.... To get it.. Only comes with the 1 .9mm & 2 1.2mm... Why?
cos that set is for the 250 Heli, and it's just a extra to the stuff you get in the kit
Minor league Aviator, against gravity which normally wins!

RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
Top
User avatar
Graham Lawrie
Moderator
Moderator
Posts: 5049
Joined: Thu Nov 06, 2014 7:14 pm
Location: Kinlochleven, Scotland
Contact:
Contact Graham Lawrie

Re: What did the postman bring today

Post by Graham Lawrie »

Very nice drivers:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius




CITIZEN # 521
Top
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: What did the postman bring today

Post by Tony »

Should have got them in the first place Graham, but I was ignorant to what was the best then..
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Top
User avatar
murankar
Supporter
Supporter
Posts: 1557
Joined: Sat Nov 08, 2014 5:29 pm
Location: Mentor, Ohio

Re: What did the postman bring today

Post by murankar »

Outside of the .9 the common hex keys for the 450 and 250 are close. 1.5mm, 2mm and in some rare cases 2.5mm. I do most of my builds with 1.5mm and 2mm. That's why I bought those to sizes from scorpion. For those other sizes I have the exi 12 piece kit which has a 3mm, side cutters, ball link wrench and remover finally a pair of needle nose. The ball link pliers are a waist it that kit. Bthey bend really easy and tear up the ball links if your not extremely carefull.
Matthias "URI X3" Urankar | Citizen 00742
Kit: Gaui X3
Servos: BK BL 3001 HV, BL 5005 HV
Motor: Scorpion HK 2520-3500 Kv
TX/RX: Specktrum DX6, VControl
Charger: PowerLabs PL6
Batteries: Pulse Ultra 2250, 35C
Top
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: What did the postman bring today

Post by Tony »

Removed
Last edited by Tony on Wed Dec 03, 2014 4:54 pm, edited 2 times in total.
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Top
User avatar
CrazyCooter75
Member
Member
Posts: 122
Joined: Tue Dec 02, 2014 3:52 pm
Location: Spring Branch, Texas

Re: What did the postman bring today

Post by CrazyCooter75 »

danhampson wrote:I hide the invoices lol. She would go mental if she knew what I spent over the last 2 years.
+1

Same here Dan! My wife thinks that this is a fairly cheap hobby. :lol: She was going to buy me a new 5500mah pack for my 550 as a birthday present, and freaked out when she saw how much they cost...lol.
Tarot 450 FBL (Robird, YEP45, Hobbymate 2000KV)
Align 500 Pro DFC (Robird, YEP80, Turnigy SK3 1600KV)
Align 550E Pro DFC (Robird, YEP 120LV, 730MX)
Align 700E Pro DFC (GPro, YEP 120HV, 800MX)
Align 700G DFC (Brain, OS GT15HZ)
BAH Nemesis 240 Mini Quad
Top
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: What did the postman bring today

Post by Derek »

lol...you guys! Too funny!

My wife knows exactly, to the penny, how much I spend on parts and replacements. I tell her that I need something and she says "OK". My wife is awesome!!!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
Top
User avatar
KevG
Supporter
Supporter
Posts: 1642
Joined: Fri Nov 07, 2014 4:59 pm
Location: South Wales, UK

Re: What did the postman bring today

Post by KevG »

Just got my hands on a smoking deal of a Spartan Vortex Vx1n and datapod, now to strip the 250 again,
Minor league Aviator, against gravity which normally wins!

RotoriousFPV quads Micro Rad 3" Gat 4" and Rad 5"
D-Quad Obsession
Yuneec Typhoon H
Taranis Qx7,
Top
User avatar
Tony
Supporter
Supporter
Posts: 3203
Joined: Thu Nov 06, 2014 3:01 pm
Location: United Kingdom

Re: What did the postman bring today

Post by Tony »

Nice one Kev, you'll have that bird flying itself soon...lol
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Top
User avatar
Lee
Moderator
Moderator
Posts: 1824
Joined: Fri Nov 07, 2014 6:16 pm
Location: Tarifa, Spain

Re: What did the postman bring today

Post by Lee »

Got these from the postie today.
About time. It a month to the day since they were shipped from Asia.
IMG_0901.JPG
IMG_0901.JPG (2 MiB) Viewed 2636 times
GOBLIN 570------IKON
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot

Citizen #229
Top
User avatar
Derek
Supporter
Supporter
Posts: 3948
Joined: Fri Nov 07, 2014 7:45 pm
Location: Fort Wayne, Indiana, USA

Re: What did the postman bring today

Post by Derek »

Very cool, Lee! It looks like a "good time" is going to be had soon, lol.

I got my package, too. I order some parts and a 4S 1400mah 65C battery, some wire, antenna extensions, and some nylon hardware. Very cool!
New Parts.jpg
New Parts.jpg (81.88 KiB) Viewed 2634 times
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8

Citizen # 00744
Top
Post Reply

Return to “The Lounge”