Nuts and Bolts
Moderator: Moderators
Nuts and Bolts
Could anyone help? I'm looking for set of bolts for the HK450gt pro2 and I'm not sure if Align ones fit or even what size they are.
I would appreciate any pointers so I can finish off my 450 rebuild. Many thanks
I would appreciate any pointers so I can finish off my 450 rebuild. Many thanks
Re: Nuts and Bolts
This is my go to shop for nuts and bolts Treff.
http://www.modelfixings.co.uk/
http://www.modelfixings.co.uk/
GOBLIN 570------IKON
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot
Citizen #229
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot
Citizen #229
Re: Nuts and Bolts
Where/which bolts on the heli are looking to replace.. Should be the same as Align.
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: Nuts and Bolts
Download the 450 v2 or even dfc v3 manual from align's website.. That will give u the descriptions/dimensions of each screw throughout the illustrations. Most are 2.5 x 5mm.
Last edited by cml001 on Thu Dec 11, 2014 10:16 pm, edited 1 time in total.
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: Nuts and Bolts
The frame screws are M2 of different lengths.
GOBLIN 570------IKON
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot
Citizen #229
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot
Citizen #229
Re: Nuts and Bolts
Some are 2mm as well yeah.
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: Nuts and Bolts
rcscrewz.com I think is the web site. I am not sure what country they ship from. At one time they sold complete set of screws for Align models.
http://www.rcscrewz.com/index2.php?manu ... 48eaed6bb8
http://www.rcscrewz.com/index2.php?manu ... 48eaed6bb8
Matthias "URI X3" Urankar | Citizen 00742
Kit: Gaui X3
Servos: BK BL 3001 HV, BL 5005 HV
Motor: Scorpion HK 2520-3500 Kv
TX/RX: Specktrum DX6, VControl
Charger: PowerLabs PL6
Batteries: Pulse Ultra 2250, 35C
Kit: Gaui X3
Servos: BK BL 3001 HV, BL 5005 HV
Motor: Scorpion HK 2520-3500 Kv
TX/RX: Specktrum DX6, VControl
Charger: PowerLabs PL6
Batteries: Pulse Ultra 2250, 35C
Re: Nuts and Bolts
Thanks for the replies guys. I need them all really lol but the longer ones that hold the vertical fin and tail box. This is a complete rebuild. Changing everything
including all the bearings. The ones on the main shaft had gone completly. Is there some sort of kit with all the sizes supplied, or do I have to buy the bolts
a bit here and a bit there? Cheers
including all the bearings. The ones on the main shaft had gone completly. Is there some sort of kit with all the sizes supplied, or do I have to buy the bolts
a bit here and a bit there? Cheers
Re: Nuts and Bolts
The page I linked has complete sets.
Matthias "URI X3" Urankar | Citizen 00742
Kit: Gaui X3
Servos: BK BL 3001 HV, BL 5005 HV
Motor: Scorpion HK 2520-3500 Kv
TX/RX: Specktrum DX6, VControl
Charger: PowerLabs PL6
Batteries: Pulse Ultra 2250, 35C
Kit: Gaui X3
Servos: BK BL 3001 HV, BL 5005 HV
Motor: Scorpion HK 2520-3500 Kv
TX/RX: Specktrum DX6, VControl
Charger: PowerLabs PL6
Batteries: Pulse Ultra 2250, 35C
Re: Nuts and Bolts
http://www.experiencerc.com/store/h4506 ... 15016.html
Frame hardware only
http://www.experiencerc.com/store/h4509 ... -2789.html
Frame hardware only
http://www.experiencerc.com/store/h4516 ... 13108.html
This set covers a lot more.. These are Align parts from expierience rc.. In the UK fastlad is the same if u wanted to try them.... Personally I've found if it's just a few specific screws.. I'll just pick up a pack of the size from my hobby store.. They carry a few different brands.. I usually get Patriot. Hope this helps.
Frame hardware only
http://www.experiencerc.com/store/h4509 ... -2789.html
Frame hardware only
http://www.experiencerc.com/store/h4516 ... 13108.html
This set covers a lot more.. These are Align parts from expierience rc.. In the UK fastlad is the same if u wanted to try them.... Personally I've found if it's just a few specific screws.. I'll just pick up a pack of the size from my hobby store.. They carry a few different brands.. I usually get Patriot. Hope this helps.
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: Nuts and Bolts
Thanks again everyone that is really great info. I will be sending for one of those kits which will make things
a lot simpler. Cheers
a lot simpler. Cheers
- danhampson
- Site Admin
- Posts: 1746
- Joined: Thu Nov 06, 2014 2:54 pm
- Location: Manchester, United Kingdom
- Contact:
Re: Nuts and Bolts
I've had a set of rcscrewz upgrade bearings in my protos, I did a full bearing change after its first season's flights, I think that I got them from fast lad's.
FPV addict.
- Graham Lawrie
- Moderator
- Posts: 5049
- Joined: Thu Nov 06, 2014 7:14 pm
- Location: Kinlochleven, Scotland
- Contact:
Re: Nuts and Bolts
+1 on Lee:) thats where i get mine:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521