http://youtu.be/9viTX12nNJI
Christmas gift fun!
Moderator: Moderators
Christmas gift fun!
So I was lucky enough to get a new 180CFX from my wonderful in-law parents (with a bit of help from my lovely wife
). I haven't started a flight log thread for myself yet, so wanted to put this up in a standalone for the moment since it is a new heli on the market and I think Gaba is the only other that's posted a view of one in action so far here.
http://youtu.be/9viTX12nNJI
http://youtu.be/9viTX12nNJI
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
- Graham Lawrie
- Moderator

- Posts: 5049
- Joined: Thu Nov 06, 2014 7:14 pm
- Location: Kinlochleven, Scotland
- Contact:
Re: Christmas gift fun!
Says Web page not available:(
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Re: Christmas gift fun!
Odd. I just checked it on a non-signed in browser and no issues. Anyone else having problems viewing?
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
Re: Christmas gift fun!
Works fine for me
Nice flying Paul
Nice flying Paul
JESSE DX8
LYNX and Oxy Heli N. TX Field REP
OXY 3IKON KST 215 Servos
OXY 4 Switch BladesIKON 2
Align T REX 550e V2 DFC head Scorpion 4025 1100KV IKON HW 100a ESC RAIL BLADES
LYNX and Oxy Heli N. TX Field REP
OXY 3IKON KST 215 Servos
OXY 4 Switch BladesIKON 2
Align T REX 550e V2 DFC head Scorpion 4025 1100KV IKON HW 100a ESC RAIL BLADES
- Graham Lawrie
- Moderator

- Posts: 5049
- Joined: Thu Nov 06, 2014 7:14 pm
- Location: Kinlochleven, Scotland
- Contact:
Re: Christmas gift fun!
At home now Paul and it is working:) just to watch it now:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Re: Christmas gift fun!
Yep, worked fine for me! Nice bit of flying. I got the opportunity to fly my friends 180 yesterday. It's a pretty nice helicopter but I think the 450's are the smallest I'll go. I do have an MCPX that was given to me and it needs some parts replaced but I'm just not in a hurry to repair it.
Anyway...it looks like you enjoyed your new helicopter. Very cool!!
Anyway...it looks like you enjoyed your new helicopter. Very cool!!
Derek
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
Foam Board Scratch Build Plane Fanatic
HK Assault 700 (to be built)
Align Trex 600 Pro DFC, Ikon
Align Trex 500e
ZMR 250 FPV Race Quad
HK Skyfun with 5.8ghz FPV
Spektrum DX8
Citizen # 00744
- Graham Lawrie
- Moderator

- Posts: 5049
- Joined: Thu Nov 06, 2014 7:14 pm
- Location: Kinlochleven, Scotland
- Contact:
Re: Christmas gift fun!
Really cool wee heli Paul looks like it handles ver well:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Re: Christmas gift fun!
Well. It was greta while it lasted. Just took it for a flight. Doing some gyro tuning. Was doing a piro and did a reversal and it went all Dunkan Bossion on me: http://youtu.be/O18xkNWPGhA?t=30s
Uncontrolled, full tilt piro. The canopy got loose or something because the mains ended up eating it (confetti raining down). TH and let it fall to the ground (about 15ft up at the time).
Blade grip arm is toast, which means new blade grip. Blade links are no where to be found. There is a tooth missing on the main gear, but I'm guessing it will fly fine still. Servos seem to have survived. Nothing wrong with the tail as far as I can tell. I'll have to take the blades off to do a spin up test to be sure.
I'm guessing the tail end points are set a little too long and the reversal I did ended up causing it to jam up the tail slider/control arms. Will need to find out if there are instructions on how to adjust that setting.
Uncontrolled, full tilt piro. The canopy got loose or something because the mains ended up eating it (confetti raining down). TH and let it fall to the ground (about 15ft up at the time).
Blade grip arm is toast, which means new blade grip. Blade links are no where to be found. There is a tooth missing on the main gear, but I'm guessing it will fly fine still. Servos seem to have survived. Nothing wrong with the tail as far as I can tell. I'll have to take the blades off to do a spin up test to be sure.
I'm guessing the tail end points are set a little too long and the reversal I did ended up causing it to jam up the tail slider/control arms. Will need to find out if there are instructions on how to adjust that setting.
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
- Graham Lawrie
- Moderator

- Posts: 5049
- Joined: Thu Nov 06, 2014 7:14 pm
- Location: Kinlochleven, Scotland
- Contact:
Re: Christmas gift fun!
Unlucky Paul:( you were doing so well:)
Align 600
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Align 550
Align 450 Pro V2 AR7200BX
Align150
Mini-Quad 250/Emax NightHawk /Fossil V2/TBS Disco/Volt
DX6i
MHS Brain/Spartan Vortex/AR7200BX /Microbeast Plus HD
Blade mqx
Scorpion BUG
Fatshark Predator V2 & Mobius
CITIZEN # 521
Re: Christmas gift fun!
Man you cant catch a break with the micros. Looks like you'll need to stick with the 450 class and bigger. That sucks, hopefully it wont be a huge dent in the wallet to fix.
Matthias "URI X3" Urankar | Citizen 00742
Kit: Gaui X3
Servos: BK BL 3001 HV, BL 5005 HV
Motor: Scorpion HK 2520-3500 Kv
TX/RX: Specktrum DX6, VControl
Charger: PowerLabs PL6
Batteries: Pulse Ultra 2250, 35C
Kit: Gaui X3
Servos: BK BL 3001 HV, BL 5005 HV
Motor: Scorpion HK 2520-3500 Kv
TX/RX: Specktrum DX6, VControl
Charger: PowerLabs PL6
Batteries: Pulse Ultra 2250, 35C
Re: Christmas gift fun!
A bad few days for crashes 
My Warp and Goblin in one week.
Now your new 180
My Warp and Goblin in one week.
Now your new 180
GOBLIN 570------IKON
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot
Citizen #229
WARP 360--------IKON
QAV 500----------Open Pilot
RCXH250---------Open Pilot
Citizen #229
Re: Christmas gift fun!
Sad news Paul after watching such a good vid on the first one.
Tony - AKA Blackwarrior - nice to be home again
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Novice pilot
HK450 FBL - Hubsan X4 - RCX H250 FPV Quad with Skyzone goggles..
I reserve the right to be wrong: if proved wrong: I reserve the right to change my mind!!
Re: Christmas gift fun!
My first non-pilot error crash. 
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
Re: Christmas gift fun!
Just ordered up some replacement parts. Luckily everything I needed was in Stock.
Gotta offload the ncpx and mcpxbl. And my 300x. Fire sale coming soon!
Gotta offload the ncpx and mcpxbl. And my 300x. Fire sale coming soon!
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
Re: Christmas gift fun!
Lol.. Confetti.. Lol.. Wow... So the canopy caused the crash?
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel
Re: Christmas gift fun!
No. I'm not entirely sure what happened. It started piroing uncontrolled. Then the canopy shredded. The blade links were gone when I picked it up and one blade holder arm was broken off. I hit th when it started piroing so I'm thinking it may have been the arm that broke in mid flight, causing a blade to flip, which caused it to pilo. That or the tail locked up, the arm broke due to the strain of the piro compensation in an uncontrolled piro. The canopy shredded do to the blade weight bullets snagging it and ripping it off the heli.
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
Re: Christmas gift fun!
I checked the tail and it doesn't seem possible for it to jam/lock due to hyper extension. I checked the servo and it isn't stripped or malfunctioning.
Paul Volcko
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
RC-Hangout's Google+ | Paul's Google+
Citizen #72 - Bending and breaking helis since Jan 2013
Goblin 500, 700 - TRex 700 - Blade 550X, 300CFX - Spektrum DX9
Re: Christmas gift fun!
Weird... I'd like to have a go with one... Everyone seems to like them... Still need to fix my 130... Maybe I should and sell it to help fund a 180.
Team Synergy / Rail Blades / Pro Tune
Pulse Battery
Castle Creations
Morgan Fuel
Pulse Battery
Castle Creations
Morgan Fuel


