CC3D upgrade to cleanflight - big ooops

[Tony]

well today i thought id find a tutorial to upgrade my CC3D from openpilot to cleanflight.

i followed this guide to the letter. https://medium.com/@iam12hak/cleanfligh ... 963272c3ed

it went thought everything OK exept now i seem to have lost my VCP driver as it wont talk to laptop anymore... ive tried all sorts of things. tried the new one recommended on that page, no joy at all... i dont have a small 4 pin header to directly access the serial port either.

oh well, another aircraft knackered....

[Graham Lawrie]

Hi Tony, i dont think it will be knackered:) Stambo or Lee may be able to help you. I am trying to get some FPV in between the showers:)

[Tony]

Thanks Graham, how many showers are you having like....? Lol

[Lee]

We are having showers today. Flew in an underground garage this morning.

[Graham Lawrie]

I have a great video uploading of one of today's flights:) 1 hour to go:)

[KevG]

Tony try this driver

stmicroel_virtual_131_64.exe

[danhampson]

tony follow this link install the driver and you can access the cc3d via usb using cleanflight config software.

http://www.st.com/web/en/catalog/tools/PF257938#

[Lee]

Dan I have flashed my CC3D to Cleanflight.
Worked first time.
But the channel mapping is all out. Any ideas?
Cheers

[Stambo]

Lee there is a channel mapping drop down in Cleanflight configurator.
I think it is on the config tab.
Pick the right one (don't forget to save) then check it in the receiver tab.

[Tony]

tony follow this link install the driver and you can access the cc3d via usb using cleanflight config software.

http://www.st.com/web/en/catalog/tools/PF257938#

that didnt work Dan either.. thanks though

and thanks Kev for your help on Skype..

[Lee]

Lee there is a channel mapping drop down in Cleanflight configurator.
I think it is on the config tab.
Pick the right one (don't forget to save) then check it in the receiver tab.

None of the configs are right.
I have tried all three.

[danhampson]

have you tried restoring it with the cc3d ground station tony, open ground station on the firmware tab and try to auto update it may reflash the cc3d with its own firmware.

[Stambo]

Are you using PPM? have you ticked the box in config?
Is your board rotated, have you set that in config?

[Graham Lawrie]

Think i will stick with baseflight:)

[Tony]

I can't do anything to the board as there's no comm port on the usb... Kev is sending me a pst lead so I can program it with my own usb to serial adapter.. Not much I can do till then...I've tried everything... Skyping Kev and Lee last night but it won't recognise the USB port.. Thanks tho guys...

[Tony]

ok ive took the plunge and purchased the Full Naze32 board for £32.. should be here tomorrow or wed

[Graham Lawrie]

Yeeeeeeeeeaaaaaaahhhhhhhhhhhhh:)

[Tony]

Yeeeeeeeeeaaaaaaahhhhhhhhhhhhh:)

[KevG]

Still try and un brick the cc3d though mate,

[Tony]

Oh yes I will do Kev, I might even build another quad all by myself.... Haha